Take an Extra 10% Off items marked with the 10% OFF Sales Badge!

 

Shimano Di2 Steps SM PCE02 Diagnostic Unit

This item does not qualify for additional discounts
This item does not qualify for additional discounts

Shimano

ISMPCE02

100 items left

The Shimano Di2 Steps SM PCE02 Diagnostic Unit Tool is used for setting and updating electronic Di2 and STePS components. A battery consumption test function can detect the occurrence of surface leakage that negatively affects current flow. The diagnostic tool is required as interface for the use of the E-Tube software. Incl. USB and PC-Link cable.

The E-Tube Project is an application for use in the maintenance and error check of the various units. The following series are supported:

Compatibility
Road Dura-Ace 9070, R9150
Ultegra 6770, 6870, R8050
MTB XTR M9050
XT M8050
FOX Float iCD-Suspension
Urban / City Alfine S705
E-Bike STePS E8000, E7000, E6100, E6000, E5000
(List Not Final)

Shimano Item # • UPC
ISMPCE02
UPC : 689228775824

Customize
This function allows you to customize the global functions and operations of the system to suit your needs.
Error check
When a single unit or multiple units are connected, this function checks their operation and identifies any units which have a problem. The function does not fix any problems which are discovered.
Update firmware
This function is used to update the firmware for each unit. (The firmware can be downloaded via E-Tube Project homepage.)
Preset
This function allows you to connect one or more units and read or write all the settings of those units at a time. The readout settings can be saved in a file. The settings can also be successively written to multiple bicycles.
Unit log acquisition (only for E-Bikes)
Acquires various kinds of data from the units and display it in a report format. In the report, you can check the settings of each unit and the battery status.

For maintenance, the SM-PCE02 PC linkage device must be connected directly to the USB port of the computer, without using an intermediate device such as an USB hub.

The E-Tube software is used to carry out tasks such as problem diagnosis of single units as well as of the whole system, for updating firmware and customization. The E-Tube Project includes the following main functions:

Original Shimano parts guarantees that all components work perfectly for optimum performance and maximum safety and longevity.